Brass Leather Bar Handles With Backplates

A gold brass bar handle with brown, blue, pink, green or black veg-tanned leather with solid brass backplate.

A premium addition for cabinet doors, wardrobes and doors. 

Suitable for integrated appliances. 

Each handle leather is cut, stitched, edged and finished by hand.

Sold individually.

SIZES & SPECIFICATION HANDLE:

Length: 160mm

Height: 16mm

Projection: 42mm

Hole Centre: 128mm

SIZES & SPECIFICATION BACKPLATE:

Length: 160mm

Width: 17mm

Depth: 3mm

Hole Centre: 128mm

SCREWS:

For additional screw lengths, please select from the link below:

https://www.pushkahome.com/additional-screws-for-brass-hardware.html

AFTERCARE:

We recommend using some leather natural beeswax-based conditioner and a soft cloth. 

First, apply a very light coat of conditioner with the cloth or your fingers to the leather and gently rub in a circular motion.

Leave your leather to absorb the conditioner - this can take between five and twenty minutes. 

Once dried, buff with the soft cloth until your leather has a desired shine.

We recommend repeating the process around every six months.

Please note, our leather is not water resistant and may stain when wet. If it does get wet simply wipe off excess water and allow to dry naturally.

LEATHER SUSTAINABILITY:

All of our leather is sustainably sourced and prepared for us in the UK.

It’s veg-tanned leather which means the tanneries use natural materials and dyes like bark, roots and leaves to prepare the hides, rather than chemicals used to produce more commonly used chrome-tanned leather.

Using natural fibres means no harm to tannery workers, and waste can be safely recycled with no impact on our waterways, giving our oceans the respect they deserve.

Veg-tanned leather takes longer to produce than its chrome-tanned alternative – up to fifteen months versus just a day or so.